| Foundation & plinth | Reinforced concrete strip foundation (C20/25) to the structural design, formwork-block plinth wall with ring-beam reinforcement. 12 cm reinforced ground slab with welded mesh on a compacted gravel bed; bituminous damp-proof membrane. 10 cm XPS plinth insulation with plinth render. | Reinforced strip or raft foundation (C25/30) based on the soil report and structural design, 15 cm reinforced ground slab. Two-layer bituminous damp-proof membrane, 12 cm XPS plinth insulation, finished with pebble-dash or mineral render. | Thermal-bridge-free reinforced raft foundation (C25/30, XC2) with 15–20 cm load-bearing EPS/XPS insulation beneath the slab, or a strip foundation with a full plinth thermal break. Two-layer radon-resistant bituminous membrane, 15 cm XPS plinth insulation, premium plinth cladding (e.g. porcelain or cast-stone tiles). |
|---|
| Load-bearing walls & partitions | External load-bearing walls in Porotherm 30 N+F or YTONG 30 blocks, laid in thin-bed or conventional mortar. 10 cm Porotherm 10 N+F or YTONG 10 partition walls. System lintels above openings. | External walls in Porotherm 30 Klíma or YTONG 30 Lambda+ blocks, Dryfix / thin-bed adhesive bonding for improved thermal performance. 10 cm partitions, upgraded to 12 cm around wet rooms and service shafts. 25 cm internal load-bearing walls. | External walls in Porotherm 38 Klíma / 30 X-therm Rapid or YTONG 30 Lambda+ blocks; Porotherm AKU or YTONG acoustic partitions between bedrooms and wet rooms where required. 12 cm partitions, pre-chased service routes, acoustic separation at upper-floor structures. |
|---|
| Slabs, ring beams & lintels | Precast beam-and-block slab (Porotherm or Leier) with structural topping, or a monolithic reinforced concrete slab to the structural design. Monolithic reinforced concrete ring beams on all walls with insulated ring-beam elements. System lintels (Porotherm A-10 / YTONG) above openings. | Monolithic reinforced concrete slab (C25/30, 18–20 cm) to the structural design, thermal-bridge-free ring beams. Reinforced concrete lintels for larger openings over 2.5 m; balconies and terrace slabs with Isokorb-type thermal-break connectors. | Monolithic reinforced concrete slab (C25/30, 20 cm) with an acoustic floating build-up under upper-floor rooms. Concealed reinforced concrete lintels for panoramic openings (up to 4–5 m) with integrated shutter and screen boxes; fully thermal-bridge-free ring-beam and balcony connections. |
|---|
| Roof structure, covering & flashing | Timber gable or hipped roof with fungicidal and fire-retardant treatment, breathable underlay, counter-battens and battens. Concrete roof tiles (e.g. Bramac or Terrán entry range) with matching ridge and edge elements. Galvanised colour-coated steel gutters and downpipes, standard flashings. | Timber roof or prefabricated nail-plate trusses, high-permeability taped underlay. Mid-range concrete tiles (e.g. Terrán Zenit, Bramac Reviva) or clay tiles (e.g. Tondach); snow guards, roof hatch and aerial outlet. Aluminium or colour-coated steel flashings. For flat roofs, PVC/TPO membrane on tapered insulation. | Structurally designed timber roof with premium clay tiles (e.g. Tondach, Creaton) or standing-seam metal roofing (e.g. Prefa, Lindab); flat roofs with two-layer membrane and extensive green-roof preparation. Full aluminium flashing, concealed gutters on request, solar mounting preparation and lightning protection. |
|---|
| Facade insulation & render | 15 cm graphite EPS 80 facade insulation, glued and dowelled, with glass-fibre mesh base coat. Tinted thin-layer silicate or silicone-resin render (e.g. Baumit, Masterplast), 1.5 mm grain, in one facade colour. Attic slab with 25 cm mineral wool or blown insulation. | 20 cm graphite EPS 80 insulation (mineral-wool fire barriers around openings), silicone-resin render in two colours or partial facade cladding (e.g. brick slips up to 10–15 m²). Covered terrace soffits rendered or timber-clad; 30 cm attic/roof insulation. | 20 cm rock wool or graphite EPS facade insulation with premium silicone-resin render, plus architectural cladding (e.g. porcelain, HPL, thermo-wood or clinker brick) on selected areas. 35–40 cm roof/attic insulation, fully detailed thermal-bridge-free junctions. |
|---|
| External windows, doors & shading | Triple-glazed, 5–6 chamber uPVC windows (e.g. Rehau Euro-Design 70, Kömmerling 76 AD), Uw ≤ 1.0 W/m²K, white or single-sided colour foil. Insulated uPVC entrance door with 3-point lock, internal PVC and external aluminium sills. Shutter provision to bedrooms. | Triple-glazed uPVC windows with warm-edge spacers (e.g. Rehau Synego 80, Kömmerling 88), Uw ≤ 0.85 W/m²K, colour foil both sides, concealed hardware. Aluminium entrance door, lift-and-slide (HST) patio door in the living room. Electric roller shutters to all bedrooms and the living room, insect screens. | Aluminium or timber-aluminium windows (e.g. Schüco, Aluprof, Internorm) with triple glazing, Uw ≤ 0.8 W/m²K, slim-profile floor-to-ceiling panoramic glazing and HST sliding door. Electric aluminium shutters or zip-screens on every opening with central control; premium entrance door with fingerprint or keypad access. |
|---|
| Interior doors | CPL or decor-foil interior doors with adjustable frames, steel hinges and standard handles; interior door allowance HUF 70,000 net per door (indicative). | CPL or veneered full-height (210 cm) interior doors with concealed hinges, magnetic latches and branded handles; one pocket sliding door. Allowance HUF 120,000 net per door (indicative). | Premium ceiling-height or frameless flush-to-wall (concealed frame) interior doors in veneer, lacquer or glass, with concealed hinges and designer handles; allowance HUF 220,000 net per door (indicative). |
|---|
| Heating, cooling & hot water | Condensing gas boiler (e.g. Viessmann, Immergas, Bosch) with panel radiators and thermostatic valves, or an air-to-water heat pump (e.g. Daikin, Gree) with underfloor heating, depending on the site. Indirect DHW cylinder (150–200 l), single-zone room thermostat control. | Air-to-water heat pump (e.g. Daikin Altherma, Mitsubishi Ecodan, Viessmann Vitocal) with underfloor heating, room-by-room zone control, 200–250 l DHW cylinder. Electric towel radiators in bathrooms; one split air-conditioner in the living room. | Premium air-to-water heat pump (e.g. Viessmann, Daikin, NIBE) with underfloor heating and ceiling heating-cooling, controlled per bedroom via smart thermostats. 300 l DHW cylinder with recirculation, multi-split cooling in every bedroom and the living room. |
|---|
| Plumbing, drainage & gas | Multilayer PPR/PEX hot and cold water pipework (e.g. Wavin, Rehau), insulated, PVC-KG drains, external and rainwater connections within the plot. Gas pipework from the meter to the boiler; one garden tap, washing machine and dishwasher connections. | Manifold-based PEX system to every outlet, pressure reducer and water filter, DHW recirculation line. Rainwater harvesting provision (tank connection), two outdoor taps, irrigation preparation, provision for a central water softener. | Full manifold system with central water softener and filtration, timed DHW recirculation, leak detection with automatic shut-off. Rainwater harvesting system with tank and pump, controlled garden irrigation, pool provision on request. |
|---|
| Electrical & low-voltage | Concealed copper wiring rated for a 3×32 A supply, consumer unit with MCBs and RCD; 2–3 sockets and 1 switch per room, 6 sockets in the kitchen, 5 in the living room. Standard switchgear (e.g. Schneider Asfora, Legrand Valena), TV and internet cabling to the living room, doorbell, light points provided (no fittings). | Extended installation: 4–6 sockets per room, two-way lighting, outdoor and terrace sockets, Cat6 to every bedroom and the living room, wiring for shutter control. Mid-range switchgear (e.g. Schneider Sedna, Legrand Niloé), LED spot provision in suspended ceilings, alarm pre-wiring, cabled position for a solar inverter. | Star-topology or KNX/smart-home-ready cabling, designer switchgear (e.g. Schneider Unica, Gira, Jung), video intercom, alarm system with sensors, structured network with rack cabinet and Wi-Fi access points. 11 kW EV wallbox installed, controlled LED lighting circuits, exterior lighting. |
|---|
| Ventilation, solar & smart home | Extract fans in wet rooms, cooker hood duct. Solar provision: empty conduit from roof to consumer unit. Smart home not included. | Provision for central heat-recovery ventilation (duct routes, plant space) or decentralised heat-recovery units in bedrooms. 3–4 kWp solar PV system with inverter installed, app-controlled smart thermostat and shutters. | Central heat-recovery ventilation system (e.g. Zehnder, Helios) installed with enthalpy exchanger and filters. 5 kWp solar PV with hybrid inverter and battery provision. Smart-home base: lighting, shading, heating-cooling, alarm and intercom in one system (e.g. Loxone or KNX), including an interior-design consultation. |
|---|
| Internal plaster, screed & painting | Machine-applied gypsum plaster, two-coat skim, white emulsion paint. Floor build-up: 10 cm EPS 100 load-bearing insulation + 6 cm screed. Plasterboard ceilings in attic rooms; concrete slab for terrace and entrance. | Machine gypsum plaster, Q3 skim finish, coloured emulsion (up to 3 colours), liquid tanking in wet rooms. 12 cm EPS 100 / graphite floor insulation + 7 cm screed with insulated edge strip; plasterboard suspended ceilings with LED provision in living room and corridors. | Q4 skim finish, premium paint or decorative plaster, feature wallpaper on one or two walls per the interior-design proposal. 15 cm graphite floor insulation + floating screed with impact-sound insulation, suspended ceiling with concealed LED lighting in the living room; acoustic ceilings on request. |
|---|
| Floor & wall finishes | Porcelain tiles in wet rooms, kitchen and hall (up to 60×60 cm, grid layout), bathroom wall tiling to 2.1 m. 8 mm AC4 laminate in bedrooms with skirting. Allowance: tiles HUF 6,000 net/m², laminate HUF 5,000 net/m² (indicative). | Large-format porcelain (up to 90×90 cm or 30×120 cm) floors and full-height wall tiling in bathrooms, flexible S1 adhesive. 10–12 mm laminate or SPC vinyl flooring in bedrooms. Allowance: tiles HUF 10,000 net/m², warm flooring HUF 8,000 net/m² (indicative). | Premium large-format porcelain or natural stone (up to 120×120 cm, 120×240 cm wall slabs), walk-in shower with linear drain. Three-layer oiled or lacquered engineered hardwood or premium SPC in bedrooms. Allowance: tiles HUF 18,000 net/m², wood flooring HUF 15,000 net/m² (indicative). |
|---|
| Sanitary ware & taps | Wall-hung WC with concealed cistern (e.g. Geberit Duofix or Alcaplast), ceramic basin, acrylic bath or shower tray with glass screen, chrome single-lever taps (e.g. Mofém, Grohe entry range). Sanitary allowance HUF 800,000 net for one bathroom + one WC (indicative). | Rimless wall-hung WC with soft-close seat, basin with vanity unit, 8 mm glass shower screen with floor drain, concealed rain-shower system, branded taps (e.g. Grohe, Hansgrohe). Sanitary allowance HUF 1,500,000 net (indicative). | Premium sanitary ware (e.g. Villeroy & Boch, Duravit, Laufen), shower-toilet, freestanding bath, double-basin vanity, thermostatic concealed shower systems (e.g. Hansgrohe, Grohe premium range, Dornbracht), coloured or matt-black finishes on request. Sanitary allowance HUF 3,000,000 net (indicative). |
|---|